The 4LV proves to be an extremely efficient engine without any compromise on quality. Featuring the newest system in common-rail technology, the mid-range engines deliver maximum performance and reliability, while maintaining minimal fuel consumption and exceptionally low noise & emission levels. By exceeding the strict EPA Tier 3 and EU RCD Stage 2 emission regulations, the engines feature virtually smoke and odor free operation. Equally, the 4LV doesn’t disappoint in performance. The 2.8 L displacement delivers a powerful low-end torque performance. This results in a stunning acceleration and really sets these engines apart from others in their power range. To ensure support of advancing marine technologies, direct connectivity to NMEA and J1939 CAN-bus networks has been purpose engineered into the 4LV range, allowing future-proofed integration to any multifunction bridge display.

Specifications

• Rated Output : 125 kW / 170 mhp
• Rated Speed : 3500 rpm
• Displacement : 2.755 L / 168 cu. in
• No. of cylinders : 4 cylinders
• Cylinder Bore x Stroke : 92 mm x 103.6 mm / 3.6 in x 4 in
• Combustion system : Direct Injection, Denso Common Rail System
• Aspiration : Turbocharged & Intercooled
• Alternator : Denso 12V - 130A
• Dry weight without gear : 334 kg / 736 lbs
• Dimensions : 1151 mm x 755 mm x 772 mm
• Controls : Mechanical (optional - VC10 system)
• Certifications : RCD 2 EPA Tier 3 EPA Tier 3C BSO II EMC SOLAS

NOTE:

1 kW = 1.3596 mhp = 1.34102 bhp
Fuel condition: density at 15°C = 0.842 g/cm³
Technical data is according to (ISO 8665) / (ISO 3046)
Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665)
Length includes KMH50A marine gear
(Dimensions may vary with other gears/elbow)

Standard Engine Package

• Exhaust mixing elbow [L-type]*
• Through drive exhaust**
• Alternator 12V – 130A
• B25 panel*
• VC10 Vessel Control System**
• Power steering**
• Mechanical throttle sensor*
• Flexible mounts
• Fresh water expansion tank

*Inboard model
*Sterndrive model

Optional Accessories

• High-riser mixing elbow [instead of L-elbow]*
• Through hull exhaust**
• Secondary alternator 12V – 130A or 24V – 110A including smart regulator
• Extension harness [3m, 5m, 10m, 20m]
• Second station
• C35 panel*
• Sidemount control head*
• VC10 Vessel Control System*
• JC20 Inboard Joystick*
• JC10 Sterndrive Joystick**
• NMEA2000 Engine monitoring system
• Internal tie-bar
• Semi 2-pole
• SOLAS including Certificate [factory fit only]
• Hot water connection
• Water separator
• Man Over Board Switch (single)
• C-Type trolling (KMH50 only)*
• On-board spare parts kit